P90 M-Trigger Evo

Order Info

PLEASE READ THIS WHOLE SECTION

• Next batch estimated shipping August 2025

• All previous M-Trigger owners since 2018 get a discount to upgrade to the Evo. M-Trigger ETU owners get an extra discount.

  • We will verify your name/email to confirm you are a previous customer.

• The Perun ETU++ mosfet is REQUIRED for AEG’s. You have the option of ordering the Evo without a mosfet if you already have a Perun ETU++. Any M-Trigger ETU owners can reuse their ETU++ mosfet with the Evo.

• HPA users should not order a mosfet. You will solder your engine’s trigger wires to the Evo gearbox board.

• This is compatible with all P90’s! TM, Krytac, Novritsch, Cyma, Cybergun, King Arms, Classic Army, Double Bell, and everything else. G&G requires permanently removing the built-in laser.

• Any questions about ordering or about the M-Trigger Evo -> Contact Us

Features

New for 2025… the best P90 trigger system we’ve ever made. (We say that every year but it’s true.) We took the feedback from our M-Trigger ETU last year to make a new trigger with more features, better reliability, higher quality, and even better trigger feel.

Contact us with any questions.

Updated Version 1.3 June 2025

• New skeletonized trigger design

• Cable wrap included for easier installation

• Minor design improvements

• OD Green and Navy Blue colors discontinued due to low demand

Included in box

• Fully assembled trigger unit, selector switch, and cutoff unit

• Cable set

• SR PVC velcro patch

• Perun ETU++ mosfet is sold separately and is required for AEG

Compatibility and Installation

• Compatible with ALL AEG P90’s

  • TM, Krytac, Novritsch, Cyma, Cybergun, Classic Army, King Arms, Double Bell, JG, Echo1, G&G, and everything else.

• Compatible with any of the above with Wolverine Hydra HPA engine installed

• Easy installation

  • No soldering (except for HPA)

  • No opening the gearbox

  • Krytac requires splitting the body

  • G&G requires splitting the body and removing the built-in laser switch

• Plug and play with Perun ETU++ mosfet (required for AEG)

• Compatible with brushless motors

• Compatible with DSG gearboxes

Trigger

• First ever pivot-style trigger for P90’s, available in custom colors

• Removes trigger bar for smoothest possible trigger feel

• Adjustable trigger sensitivity 0.5 - 2 mm

• Adjustable trigger stop / overtravel 0.5 - 4 mm past the trigger sensitivity setting

• Anti-vibration adjustment screws to firmly keep your trigger sensitivity settings

• Each fire mode has the same trigger pull that you set, no 2-stage trigger

• No trigger calibration needed

• Japanese Omron microswitch rated for 1 million trigger pulls

Selector Switch

• Tactical selector switch, available in custom colors

• Custom fire modes: change EACH selector position to semi-auto, binary trigger, 2-5rd burst, full-auto, or safe (safe position is always safe)

• Electronic safety position ensures no misfires on safe no matter how short the trigger pull

• Japanese Omron microswitches rated for 300,000 fire mode changes

Cutoff System

• Electronic cutoff detection

  • Eliminates cutoff lever jams

  • Enables cycle completion to eliminate incomplete gearbox cycling

  • Ensures precise semi-auto and burst fire modes

• Adjustable cutoff lever height to compensate for variations between brands

• Compatible with Krytac P90 empty magazine detection

• Japanese Omron microswitch rated for 1 million gearbox cycles

Mosfet Functions (AEG only)

• Plug and play with Perun ETU++ mosfet, required for AEG

• EACH selector position has its own individual settings for:

  • Fire mode (semi-auto, binary trigger, 2-5rd burst, full-auto, or safe)

  • Adjustable active braking (5 settings or off)

  • Adjustable precocking (8 settings or off), long press trigger to reset spring for storage

  • Adjustable rate of fire reduction (5 settings down to 70% speed or off)

  • LiPo alarm (on/off)

  • Integrated fuse

  • Diagnostic self-test

• Easily programmable in the field without any disassembly needed

HPA

• Output points to connect to Wolverine Hydra HPA (may work with other engines)

• Requires cutting and soldering the trigger wires from the Hydra board onto our M-Trigger board

• Fire modes are controlled by the Hydra’s FCU, all the other features of the M-Trigger Evo will still work with HPA such as trigger tuning and Krytac empty mag detection

Supporter of USA small businesses

• Designed and assembled by Shadow Regime Airsoft in Indiana, USA

• Electronics design and assembly by Talisman Airsoft in Indiana, USA.

• All PCB’s made in USA

• SLS 3D printing by J10 Prints in Michigan, USA

• SR patches made by TacticoolImaging in Georgia, USA

3D View

Select “continue in browser” if needed. You can rotate the model here and take any measurements you need.

Mobile users: open in new window